top of page
MAIN_DOT_BLACK.png

Careguide

Taking care of your wooden surfboard is simple and ensures it will last for many years. Follow these easy steps to keep it in top shape.

01. Rinse with fresh water

After each surf session, or at least from time to time, rinse your board with fresh water to remove salt, sand, and debris. This helps prevent buildup that could affect the finish over time. Avoid storing your wet board in a fully sealed, waterproof bag, as trapped moisture is not ideal for any surfboard.

02. Protect from Heat & Sunlight

Your board is hollow, and the air inside expands with heat. To prevent warping, discoloration, or delamination:

→ Avoid leaving it in direct sunlight, especially on hot days.

→ Do not store it in a hot car, as temperatures can rise quickly and damage the board.

→ When not in use, keep it in a shaded, ventilated space.

03. Breather Vent Care

Your board has a Gore-Tex breather vent that regulates internal pressure. This special membrane allows air to pass but blocks water from getting in.

→ Keep the vent screwed in during normal use.

→ Check occasionally that it is properly sealed. You can unscrew or tighten it with a 17mm socket. Be gentle, as the vent is made of plastic and can be damaged if overtightened.

→ Avoid applying wax too close to the vent, since it might enter inside and block it.

→ To test the vent, blow air through it. You should feel slight resistance, but air should pass through. If no air passes, the vent screw may need replacing.

The only time you should remove the vent screw is when flying with your board. Air pressure changes quickly in a plane, and removing the vent helps prevent stress on the board.

04. Inspect Regularly for Damage

How wooden surfboards a stronger than conventional PU and epoxy surfboard. But even with good care, small dings and cracks can happen. Check your board occasionally for any signs of wear. If you see a crack, get it sealed as soon as possible to prevent water from getting in.

05. Repairs

If your board gets damaged, here is what to do:

→ Small dings affecting only the fiberglass or a tiny part of the wood

You can use standard surfboard repair methods.

If you want to do it yourself, use Solarez (UV-cured resin) or traditional epoxy and fiberglass.

Or take it to a surfboard repair shop.

 

→ Larger cracks or damage to the wood

If the wood is cracked, the best option is to bring it back to our workshop for professional repair.

If you have experience with repairs, you may be able to fix it yourself. Contact us for advice, as every repair is different and requires a specific approach.

→ Water intake (serious damage allowing water inside)

Remove the air vent screw.

Drain as much water as possible through the vent hole.

Place the board in a warm, dry area, out of direct sunlight, and allow it to dry completely.

Contact us for guidance on the next steps.

06. Need help?

If you have any questions or need advice on maintenance or repairs, feel free to reach out . Your board is built to last, and with proper care, it will serve you well for years to come.

bottom of page